Bianco Dolomite Octave with Black Dots Mosaic Polished HTC

Material Inspection

• Natural Variations: Stones are natural, so expect differences in color, pattern, texture, and veining.
• Pre-Installation Check: Inspect for any damage, such as chipped edges or broken pieces. No adjustments will be made after installation begins.

Installation Guidelines

1. Dry-Fitting: Lay out the pattern first to visualize the design and plan cuts. This is important for tiles with variation.
2. Thinset Mortar:
   • Use white thinset mortar to avoid altering tile color.
   • For faster installation, use rapid curing thinset mortar.
3. Adhesive Application:
   • Cover as much area as you can within 10-15 minutes.
   • Keep grout joints at least 1/16" apart.
   • Use a 3/16" or 1/4" square notch trowel.
   • Flatten ridges with the flat side of the trowel before laying the tiles.

Grouting

• Non-sanded grout is recommended to avoid scratching.
• Test a small area to ensure the stone won't scratch.
• Fill grout joints fully, leaving no gaps.
• Clean excess grout as you go; don’t let it harden.
• Avoid acid-based cleaners for removing grout haze.
• Use a damp sponge for final cleaning and smoothing of joints.
• Grout release is highly recommended to ease cleaning and protect against staining.

Sealing

• After installation, seal the stone with a high-quality breathable sealer to prevent water absorption, efflorescence, and staining.
• Use a color enhancer if desired to enhance the stone’s natural color.
• Reseal the tiles as needed, especially when they darken.

Cutting

• Use a wet-saw with a continuous rim diamond blade designed for marble to prevent chipping.
• Avoid using turbo or notched blades as they may damage the edges.

Care and Maintenance

• Clean stone surfaces using neutral cleaner, stone soap, or mild dishwashing detergent with warm water.
• Rinse thoroughly and dry with a soft cloth to avoid streaks.
• Avoid using cleaners with lemon, vinegar, or acids. Never use abrasive cleaners.